(891+ Reviews)

Glintora Ultrasonic Jewelry Cleaner

Glintora Ultrasonic Jewelry Cleaner

 Your gold isn’t dull, it’s dirty. Glintora uses 50kHz ultrasonic waves to lift away the film of soap, hand cream and skin oil that builds up on your rings and chains, reaching under stones and inside every link where a cloth never can. Fill it with water, press a button, and your gold comes out bright again. 

check_circle  Brings Dull Gold Back to Life 

check_circle  Cleans Under Stones and Inside Every Link 

check_circle  650ml Tank Holds Several Pieces at Once 

check_circle  3 Timer Settings with Automatic Shut-Off 

$129.00
$129.00 $188.00
SAVE 31% Sold out
Glintora Ultrasonic Jewelry Cleaner

Glintora Ultrasonic Jewelry Cleaner

$129.00
$129.00 $188.00
SAVE 31% Sold out
files/26952afd0dc6902f08e55bf357b05ad3.jpg

My gold ring tends to collect hand cream and soap around the setting, and wiping the outside never seemed to do much for those little corners. I tried this cleaner with water, and it was convenient to let it run while I got ready. The timer options are simple, and I like not having to scrub the ring manually.

Elina James
Official Authorized Retailer
This product is not available on Amazon or eBay. You are purchasing directly from the only authorized seller — which means full warranty, verified authenticity, and dedicated customer support. Beware of counterfeit listings on third-party marketplaces.
View full details

         The Dirt Isn’t On Your Gold, It’s Inside It 

        On a ring, the grime packs in underneath the stone and down into the tiny grooves of the setting. On a chain, it works its way inside every single link. That’s why polishing the outside never really works. Glintora sends 50,000 sound waves a second through the water, and those waves create millions of microscopic bubbles that reach into every one of those gaps and lift the dirt away.

         Three Settings, One Button 

        Choose 3 minutes for a quick weekly freshen-up of the pieces you wear most, 6 minutes for everyday cleaning of rings and chains, or 12 minutes for gold that hasn’t been properly cleaned in years. Press the button and walk away. Glintora switches itself off when the cycle finishes, so you can start it while you get ready and come back to it later.

         Clean the Whole Jewelry Box at Once 

        The 650ml tank is big enough to take a handful of rings, a couple of chains, a bangle and a pair of earrings all in one go. Instead of cleaning one piece at a time, you can work through everything you own in a single afternoon. The tank is 304 stainless steel, the same grade used in good kitchen sinks, so it won’t rust or stain and it wipes clean in seconds.

        What Our Customers Say

        Excellent 4.8 / 5

        I wear a thin gold chain almost every day, and it gradually started looking less bright. I wanted something that could reach between the links instead of just polishing the outside. This cleaner is easy to fill and operate, and the stainless steel tank feels sturdy. It’s a useful addition to my regular jewelry care routine.

            Why Settle for Less?

            A closer look at what sets Glintora apart from typical mini jewelry cleaners.

              Others
             50kHz Ultrasonic Frequency 
             650ml Large Tank 
             304 Stainless Steel Tank 
             3 Timer Settings 
             Automatic Shut-Off 
             Fits Several Pieces at Once 

            check_circle
            Gets Into the Places You Can’t Reach

            Ultrasonic waves clean under stones, inside settings and down through every link of a chain, which is exactly where the dirt that dulls your gold is sitting

            check_circle
            No Scrubbing, No Scratching

            Gold is a soft metal, and brushing it over and over leaves fine scratches that build up over the years. Nothing touches your jewelry here except water and bubbles.

            check_circle
            Three Timer Settings

            3, 6 or 12 minutes, so a ring you wear daily and a necklace you haven’t touched in years each get the right amount of cleaning

            check_circle
            It Stops By Itself

            Press start and get on with your morning. Glintora shuts off automatically when the cycle ends, so there’s nothing to watch or switch off

            check_circle
            Stays Put While It Works

            A rubber base keeps it steady on your dresser or bathroom counter and keeps the vibration down

            check_circle
            Small Enough to Leave Out

            It takes up about as much room as a paperback, so it can live on your dressing table instead of being packed away in a cupboard

            Why Choose Glintora?

            Because your gold should look the way it did the day you bought it.

            Frequently Asked Questions

            contact_support

            What kinds of jewelry can I clean in it?

            Solid gold, silver, platinum, stainless steel and diamonds all clean up beautifully. That covers rings, wedding and engagement bands, chains and necklaces, pendants, earrings, bracelets, bangles, anklets, charms, brooches and cufflinks. When you’re finished with the jewelry, the same tank cleans eyeglasses, sunglasses and metal watch bands.

            contact_support

            Is there anything I shouldn’t put in?

            Yes. Keep out pearls, opals, emeralds and turquoise, because those stones are soft or porous and ultrasonic cleaning can damage them. The same goes for anything with glued-in stones, delicate antique settings, or gold plating that’s already worn or lifting at the edges. If you’re unsure about a particular piece, ask your jeweler before you clean it.

            contact_support

            Is it safe for my engagement ring?

            For solid gold or platinum with a diamond, yes, and it’s one of the things it does best, because that’s where dirt collects most. If your ring has a softer coloured stone, or if a stone feels at all loose in its setting, have a jeweler check it first.

            contact_support

            Do I need to buy a special cleaning solution?

            No. Plain tap water works for almost everything. If a piece is particularly grimy, add a single drop of mild dish soap to the water

            contact_support

            How long does a cycle take?

            Three minutes for a quick freshen-up, six for an everyday clean and twelve for a deep clean. Jewelry that hasn’t been cleaned in a long time may need a second cycle, and that’s perfectly normal.

            contact_support

            How will I know it’s working?

            You’ll see the water go cloudy as the dirt lifts off, and you’ll hear a steady hum while it runs. That hum is the ultrasonic waves doing their job.

            contact_support

            How often should I clean my jewelry?

            Once a week for a ring you wear every day, and whenever they start to look dull for everything else.